• Bridge Type Bucket Reclaimer Manufacturers, Bridge Type Bucket Reclaimer Factory, Supply Bridge Type Bucket Reclaimer

Bridge Type Bucket Reclaimer

Brand SINOMALY

Product origin Liyang, Jiangsu, China

Delivery time 6-7 months

Supply capacity 200 sets / year

1. The bridge type bucket wheel reclaimer can be used in different stockyards.
2. Cement, coal, steel, port, electric power, water conservancy and other industries are widely used.
3. The bridge type bucket wheel reclaimer has the advantages of continuous operation, large production capacity, large stock yard reserves, good mixing effect and low power consumption per unit product.

Bridge Type Bucket Reclaimer

Brief introduction of bridge type bucket wheel reclaimer:

The bridge type bucket wheel mixing reclaimer is mainly used in the storage yard of the material yard in the metallurgical industry to reclaim the ore.            


The pre homogenization (blending) of ore and coal raw materials is an important measure to improve the quality of raw materials. The bridge type bucket wheel mixer reclaimer is a good mixer reclaimer in the world at present, which provides a reliable basis for realizing the concentrate blending scheme of various steel plants. After the raw materials are used in the sintering plant, the effect is good, which can improve the tapping rate and furnace life of the blast furnace.


In the thermal power plant, mixing high-quality coal with low-quality coal to reach the predetermined combustion value can make full use of low-quality coal and improve economic benefits.


Working principle of bridge type bucket wheel reclaimer:

The two bucket wheel devices of the reclaimer are installed on the main beam and run back and forth along the length direction of the main beam on the cross section of the material pile. On the cross section of the material pile, the reclaiming buckets of the two bucket wheel devices carry out the first mixing and reclaiming at different reclaiming points respectively. The two bucket wheel devices revolving around the main beam unload the material taken down at the low position into the receiving belt conveyor arranged in the main beam at the high position for the second mixing. The receiving belt conveyor receives the material discharged by the first bucket wheel device and then transports it to the second bucket wheel At the device, the material is mixed with the material discharged from the second bucket wheel device to complete the third mixing work. When the excavated material is discharged to the ground belt conveyor of the system, the fourth mixing work is completed. In this way, the process of continuous reclaiming and discharging can meet the requirements of blending reclaiming.  


According to its structure type, bucket wheel number and reclaiming direction, it can be divided into bridge type double bucket wheel bidirectional mixing reclaimer, bridge type double bucket wheel unidirectional mixing reclaimer, bridge type single bucket wheel bidirectional mixing reclaimer and bridge type single bucket wheel unidirectional mixing reclaimer.

 

Parameter table of equipment selection:

Rail span

Material type

Material density

Material granularity

Material moisture

Reclaiming capacity

16-42

coal ,fine ore and powder ore etc

0.8-2.4

<100

<8%

50-3000


Characteristics of bridge type bucket wheel reclaimer:            

1. The structure of reclaimer is strong and durable to meet the requirements of greater capacity; 

2. The bulk material handling equipment is equipped with a variety of control methods to ensure flexible handling of bulk materials in different situations;

3. Through simple installation and simple training process, a single employee can easily operate the equipment;

4. Can adapt to the requirements of different yards, customized products for customers.

5. SinomaLY has steel pretreatment production line, which can improve the corrosion resistance of structural parts and ensure the quality of all finished products. The use of large milling machine improves the machining accuracy of large parts. In the factory, the structure is assembled as a whole and the drive system is debugged.

6. SinomaLY uses high-performance new materials, such as wear-resistant materials and composites, to improve the durability of bulk material handling equipment.        

7. Soft start and frequency conversion control are adopted to reduce the damage of stacker reclaimer caused by severe impact. Protective measures are set on the equipment, which can be adjusted or stopped automatically in case of abnormal conditions.


Control mode of bridge type bucket wheel reclaimer:            

The reclaimer is equipped with three operation modes: automatic control, manual control and machine side (maintenance) control. The three operation modes are interlocked, that is, one of the operation modes is selected, and the other two operation modes are invalid.

1. Manual control

The manual control mode is carried out on the operation platform, which is suitable for the debugging process and the reclaimer changing piles and shunting to the designated reclaiming starting point. It can complete the single step operation of each unit.

2. Automatic control

The stacking and reclaiming operation under the automatic control mode can be implemented by the central control room and the onboard control room. When the central control room is required to control the reclaimer automatically, the operator only needs to press the automatic operation button on the console, and then press the start button, all the electrical equipment on the reclaimer will start according to the predetermined procedure, and the whole machine will be put into normal automatic operation. On the console of the central control room, the reclaimer system can be started or stopped by pressing the button.

3. Machine side (maintenance) operation

The local control is suitable for local action during installation, overhaul and maintenance, which depends on the operation button set beside the machine. In this control mode, the drive mechanism of the reclaimer can only be started or stopped independently after the interlock is released.

SINOMALY Heavy Machinery Co., Ltd.

Company Profile

SINOMALY Heavy Machinery Co., Ltd. was founded in 2007. As an outstanding manufacturer and supplier of production facilities, equipment and service solutions to the cement, mining, metallurgical, chemical, coal, environmental protection, power plant and steel plant industries, we have never stopped improving productivity, driving down costs and reducing the environmental impact of operations.

Covering an area of 530mu, the Company is equipped with 80 medium and large equipment with an annual manufacturing capacity of 69,300 tons of products (totally in weight).

The Company is integrated with the study of basic theory, development & design of equipment, manufacturing of mechanical & electrical equipment, technical consultant services, and supply of spare parts.

With the CE certificate, SINOMALY has her products exported to many countries including the USA, Russia, Brazil, Saudi Arabia, Peru, Pakistan, Nigeria and Vietnam, etc., and positive feedback has been received from the customers.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right