• The Boom Type Bucket Wheel Stacker Reclaimer Manufacturers, The Boom Type Bucket Wheel Stacker Reclaimer Factory, Supply The Boom Type Bucket Wheel Stacker Reclaimer
  • The Boom Type Bucket Wheel Stacker Reclaimer Manufacturers, The Boom Type Bucket Wheel Stacker Reclaimer Factory, Supply The Boom Type Bucket Wheel Stacker Reclaimer
  • The Boom Type Bucket Wheel Stacker Reclaimer Manufacturers, The Boom Type Bucket Wheel Stacker Reclaimer Factory, Supply The Boom Type Bucket Wheel Stacker Reclaimer

The Boom Type Bucket Wheel Stacker Reclaimer

Brand Sinoma-Liyang

Product origin Liyang, Jiangsu, China

Delivery time 6-7 months

Supply capacity 200 sets / year

1. Boom type bucket wheel stacker reclaimer can be applied in different stockyards.
2. Cement, coal, steel, port, electric power, water conservancy and other industries are widely used.
3. Boom type bucket wheel stacker reclaimer has the advantages of continuous operation, large production capacity, large stock yard reserves and low power consumption.

The Boom Type Bucket Wheel Stacker Reclaimer

Brief introduction of boom type bucket wheel stacker reclaimer:

Boom type bucket wheel stacker reclaimer is suitable for long stockyard. It is a kind of large loading and unloading equipment for bulk materials with high efficiency and continuous operation. It is mainly used in coal and ore stockyard of electric power, metallurgy, coal, building materials and chemical industry. It has the characteristics of large turning radius, high production efficiency, low energy consumption and high environmental protection.  

Working principle of boom type bucket wheel stacker reclaimer: 

e materials in the stockyard by means of walking, pitching and rotary motion and rotates the bucket wheel device. It is unloaded onto the cantilever belt conveyor and then transported out by the ground belt conveyor to complete the reclaiming operation. The boom belt conveyor can operate in the positive and negative directions. During stacking, the materials of the ground belt conveyor are unloaded from the tail car to the boom belt conveyor, and the materials are also piled up in the yard according to the requirements by using the three movements of walking, pitching and turning.

Parameter table of equipment selection:

Boom length

Material type

Material density

Material granularity

Material moisture

Stacking capacity

(t/h Reclaiming capacity)


Coal, fine ore, powder ore  

and other bulk materials






Features of boom type bucket wheel stacker reclaimer: 

1. The structure of stacker reclaimer is strong and durable to meet the requirements of greater capacity;

2. A variety of tail car forms are suitable for the process requirements of different stockyards;

3. The bulk material handling equipment is equipped with a variety of control methods to ensure flexible handling of bulk materials in different situations;

4. Through simple installation and simple training process, a single employee can easily operate the equipment;

5. Can adapt to the requirements of different yards, customized products for customers.           

6. SinomaLY has steel pretreatment production line, which can improve the corrosion resistance of structural parts and ensure the quality of all finished products. The use of large milling machine improves the machining accuracy of large parts. In the factory, the structure is assembled as a whole and the drive system is debugged.

7. SinomaLY uses high-performance new materials, such as wear-resistant materials and composites, to improve the durability of bulk material handling equipment.

8. Soft start and frequency conversion control are adopted to reduce the damage of stacker reclaimer caused by severe impact. Protective measures are set on the equipment, which can be adjusted or stopped automatically in case of abnormal conditions.


Control mode of Boom type bucket wheel stacker reclaimer:            

The stacker reclaimer is equipped with three operation modes: automatic control, manual control and standby (maintenance) control. The three operation modes are interlocked, that is, one of the operation modes is selected, and the other two operation modes are invalid.            

1. Manual control            

The manual control is applicable to the working conditions required in the debugging process and the working conditions when the automatic control fails, the stacker and Reclaimer are required to continue to work, and it is allowed to stack and reclaim according to the non-specified stacking mode. The operator controls the corresponding buttons on the operation panel in the on-board control room for manual stacking and reclaiming.    

2. Automatic control

The stacking and reclaiming operation under the automatic control mode can be implemented by the central control room and the onboard control room. When the central control room is required to automatically control the stacker reclaimer, the operator only needs to press the automatic operation button on the console, and then press the start button, all the electrical equipment on the stacker reclaimer will start according to the predetermined procedure, and the whole machine will be put into normal automatic operation. On the console of the central control room, the stacker reclaimer can be started or stopped by pressing the button.

3. Standby (maintenance) control

The standby control is suitable for the local action during the installation, overhaul and maintenance, which is realized by the operation button set beside the machine. In this control mode, the interlocking of the driving mechanisms of the stacker and reclaimer is released, and can only be started or stopped independently.

Sinoma-Liyang Heavy Machinery Co., Ltd.

Company Profile

Sinoma-Liyang Heavy Machinery Co., Ltd. was founded in 2007. As an outstanding manufacturer and supplier of production facilities, equipment and service solutions to the cement, mining, metallurgical, chemical, coal, environmental protection, power plant and steel plant industries, we have never stopped improving productivity, driving down costs and reducing the environmental impact of operations.

Covering an area of 530mu, the Company is equipped with 80 medium and large equipment with an annual manufacturing capacity of 69,300 tons of products (totally in weight).

The Company is integrated with the study of basic theory, development & design of equipment, manufacturing of mechanical & electrical equipment, technical consultant services, and supply of spare parts.

With the CE certificate, Sinoma-Liyang has her products exported to many countries including the USA, Russia, Brazil, Saudi Arabia, Peru, Pakistan, Nigeria and Vietnam, etc., and positive feedback has been received from the customers.

Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right