• Side Type Scraper Reclaimer Manufacturers, Side Type Scraper Reclaimer Factory, Supply Side Type Scraper Reclaimer
  • Side Type Scraper Reclaimer Manufacturers, Side Type Scraper Reclaimer Factory, Supply Side Type Scraper Reclaimer

Side Type Scraper Reclaimer

Brand Sinoma-Liyang

Product origin Liyang, Jiangsu, China

Delivery time 6-7 months

Supply capacity 200 sets / year

1. The side scraper reclaimer can be used in different stockyards.
2. Cement, coal, steel, port, electric power, water conservancy and other industries are widely used.
3. Side scraper reclaimer, continuous work, large production capacity, low power consumption.

Side Type Scraper Reclaimer

Brief introduction of side scraper reclaimer:

This kind of reclaimer is mostly used for stacking sandstone, raw coal, ore and other bulk materials. The unmanned operation of the whole machine and the integration of machine, electricity and hydraulic system are realized. It has the characteristics of good homogenization effect, large stock yard reserves, small floor area and high degree of automation. It is the most advanced large-scale mixing process equipment in China at present. Its technical characteristics and automation level are first-class in China.            

Working principle of side scraper reclaimer:

The reclaimer is used together with the stacker in the storage yard. The materials accumulated by the stacker on one side of the silo are reciprocated by the reclaimer on the track on the other side of the silo. The materials are discharged into the guide trough through the scraper reclaiming system and transported out of the discharge belt conveyor through the guide trough. After each layer of material is picked up by the reclaiming boom, the corresponding height (i.e. the corresponding material depth) is lowered according to the preset command, and the material pile is taken out layer by layer at the corresponding reclaiming speed until all the materials in the silo are taken out. This reclaiming process makes the materials piled up by the stacker in a certain way homogenized again. When reclaiming, the operator shunts the reclaimer to the designated bin according to the command of the central control room (Note: the machine can not work in the same bin with the stacker at the same time), and correctly identifies the bin number of the machine with the help of the travel limit device. When the reclaimer is transferred into the bin to be reclaimed according to the command, the travel limit positions of the left and right ends of the bin are limited, and the reclaimer will be at the limit position, the reciprocating reclaiming operation is carried out according to the predetermined program. The encoder installed on the electric hoist can correctly control the descending angle of the scraper arm to ensure the constant reclaiming capacity of the reclaimer. Under the condition of constant reclaiming capacity and determined reclaiming speed, in order to fill the scraper with the designed maximum capacity of materials, the descending angle of the cantilever and scraper reclaiming system is gradually reduced, so as to realize the scraping of materials in the silo layer by layer. The reclaiming speed of the reclaimer adopts the frequency conversion speed regulation of the driving motor, and the reclaiming amount of the reclaimer is adjusted by adjusting the reclaiming speed. Under special circumstances, the reclaimer can reclaim materials from the stack which is not full of materials under manual operation.

Sectional view of reclaiming mode of Reclaimer:

Parameter table of equipment selection:

Equipment Type

Rail span

Material type





Material moisture

Stacking capacity


Reclaiming capacity

Detail type

Lateral Scraper Reclaimer


sandstone, coal etc.


Less than 100

Less than 2%


Luffing type/inclined type/horizontal type

1. The reclaimer is equipped with a boom made of thick and strong I-beam to ensure the strength of boom and increase the transportation distance of materials;           

2. The bulk material handling equipment is equipped with a variety of control methods to ensure flexible handling of bulk materials in different situations

3. Through simple installation and simple training process, a single employee can easily operate the equipment;

4. Can adapt to the requirements of different yards, customized products for customers.

5. SinomaLY has steel pretreatment production line, which can improve the corrosion resistance of structural parts and ensure the quality of all finished products. The use of large milling machine improves the machining accuracy of large parts. In the factory, the structure is assembled as a whole and the drive system is debugged.

6. SinomaLY uses high-performance new materials, such as wear-resistant materials and composites, to improve the durability of bulk material handling equipment.

7. Soft start and frequency conversion control are adopted to reduce the damage of stacker reclaimer caused by severe impact. Protective measures are set on the equipment, which can be adjusted or stopped automatically in case of abnormal conditions.

Control mode of side scraper reclaimer:

The reclaimer is equipped with three operation modes: automatic control, manual control and standby (maintenance) control. The three operation modes are interlocked, that is, one of the operation modes is selected, and the other two operation modes are invalid.      

1. Manual control

It can only be carried out on the console, and each part can be operated separately through the control button on the console. When the working condition switch is placed in the manual position, the automatic and standby (maintenance) working conditions can not be cut in. The manual control can start and stop the scraper reclaiming system, winch lifting system (electric hoist), end beam walking and shunting system separately, and the interlocking between the systems is lost (the interlocking between cable reel and walking mechanism is reserved), but the protection of each system still works .

2. Automatic control

The reclaiming operation under the automatic control mode can be implemented by the central control room and the on-board control room. When the central control room is required to control the reclaimer automatically, the operator only needs to press the automatic operation button on the console, and then press the start button, all the electrical equipment on the reclaimer will start according to the predetermined procedure, and the whole machine will be put into normal automatic operation. On the console of the central control room, the reclaimer system can be started or stopped by pressing the button.

3. Standby (maintenance) control

The standby control is suitable for local action during installation, overhaul and maintenance, which depends on the operation button set beside the machine. In this control mode, the drive mechanism of the reclaimer can only be started or stopped independently after the interlock is released. When the working condition switch is placed at the machine side (maintenance) position, the automatic working condition and on-board manual working condition cannot be cut in. The on-board manual working condition also has the function of on-board manual working condition. However, the operation button is only installed in the position conducive to maintenance operation. Walking operation button is not installed under standby condition.

Sinoma-Liyang Heavy Machinery Co., Ltd.

Company Profile

Sinoma-Liyang Heavy Machinery Co., Ltd. was founded in 2007. As an outstanding manufacturer and supplier of production facilities, equipment and service solutions to the cement, mining, metallurgical, chemical, coal, environmental protection, power plant and steel plant industries, we have never stopped improving productivity, driving down costs and reducing the environmental impact of operations.

Covering an area of 530mu, the Company is equipped with 80 medium and large equipment with an annual manufacturing capacity of 69,300 tons of products (totally in weight).

The Company is integrated with the study of basic theory, development & design of equipment, manufacturing of mechanical & electrical equipment, technical consultant services, and supply of spare parts.

With the CE certificate, Sinoma-Liyang has her products exported to many countries including the USA, Russia, Brazil, Saudi Arabia, Peru, Pakistan, Nigeria and Vietnam, etc., and positive feedback has been received from the customers.

Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right